The STIHL FS 461 C-EM L is ideally suited for users who are over 190cm tall.
It features the STIHL 4-point anti- vibration system. In STIHL brush cutters steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the device is easy to guide.
STIHL Ergostart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
The multi-function handle has an easy, comfortable thumb-operated control which means the operator’s hand never leaves the handle.
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
This model is supplied with the ADVANCE Universal harness and AutoCut 46-2 mowing head.
Performance PS 3
Performance kW 2.2
CO? ? g/kWh 865
Vibration value, left with mowing head m/s2 1) 1.9
Sound pressure level with metal tool dB(A) 2) 101
Vibration value, right with metal tool m/s2 1) 2.3
Total length cm 3) 185
Capacity cm3 45.6
Vibration value, right with mowing head m/s2 1) 2.7
Vibration value, left with metal tool m/s2 1) 2.4
Sound pressure level with mowing head dB(A) 2) 101
Tank volume l 0.75
Weight kg 4) 8.8
Power output kW/bhp 2.2/3.0
Standard cutting tool AutoCut 46-2